To make sure this part does fit your vehicle Check The Fit
Air Shock Absorber - Monroe Shocks/struts - Max-Air Air Adjustable Air Shock Absorber Pack of 2 (Part Number: MA705)
- Compressed Length: 276.22499999999997 MM
- Compressed Length: 10.875 IN
- Dust Shield Included: Yes
- Dust Shield Material: Rubber
- Extended Length: 441.325 MM
- Extended Length: 17.375 IN
- Hydraulic Lockout: No
- Includes Bump Stop: Yes
- Internal Rebound Bumper: Yes
- Lower Mount Code: S4
- Lower Mount Type: Stem Mount - 2.3/8\" Stem Length X 3/8\"-16 Thread Pitch
- Parts Pack(s): (4) P01134
- Shock Absorber Body End Measuring Point: Base of Stem
- Shock Absorber Rod End Measuring Point: Base of Stem
- Travel Length: 165.1 MM
- Travel Length: 6.5 IN
- Upper Mount Code: S4
- Upper Mount Type: Stem Mount - 2.3/8\" Stem Length X 3/8\"-16 Thread Pitch
- CTO: US
- Emission Code: 4
- Canadian Harmonizing Tariff Code: 8708803000
- Harmonized Tariff Code (Schedule B): 8708801600
- Harmonized Tariff Code (HTS): 8708801600
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- SDS Sheet Number: 1164
- SDR Required Flag: Y
- PRC: NEW
- Taxable: Y
- APS: 1957-1958 Ford Custom 300 (Rear) 1957-1970 Ford Fairlane (Rear) 1960-1970 Ford Falcon (Rear) 1961-1965 Ford Falcon Sedan Delivery (Rear) 1957 Ford Custom (Rear) 1965-1973 Ford Mustang Base (Rear) 1960-1965 Ford Ranchero (Rear)
- Application Summary: 1957-1958 Ford Custom 300 (Rear) 1957-1970 Ford Fairlane (Rear) 1960-1970 Ford Falcon (Rear) 1961-1965 Ford Falcon Sedan Delivery (Rear) 1957 Ford Custom (Rear) 1965-1973 Ford Mustang Base (Rear) 1960-1965 Ford Ranchero (Rear) 1961-1963 Ford Thunderbird (Rear) 1968-1971 Ford Torino GT Base Squire Brougham 500 (Rear) 1968-1971 Mercury Cyclone (Rear) 1958 Edsel Villager (Rear) 1958 Edsel Citation (Rear) 1958 Edsel Corsair (Rear) 1958 Edsel Ranger (Rear) 1958 Edsel Bermuda (Rear) 1958 Edsel Roundup (Rear) 1958 Edsel Pacer (Rear) 1960-1969 Mercury Comet (Rear) 1967-1973 Mercury Cougar (Rear) 1962-1963 Mercury Meteor (Rear) 1968-1971 Mercury Montego (Rear) 1975-1980 American Motors Pacer (Rear) 1979-1983 Mazda GLC (Rear) (Body: Wagon)
- Extended Product Description: Monroe Max-Air MA705 Air Adjustable Air Shock Absorber Pack of 2
- FAB: CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- FAB: EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- FAB: BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- FAB: MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission see owner's manual)
- FAB: EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride
- Product Description - Invoice: Max-Air Air Shock Absorber
- Marketing Description: Ideal for hauling, Monroe(R) Max-Air(R) shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner's manual.)
- Short Product Description: Air Shock Absorber
- Manufacturer:
- Monroe Shocks/struts
- Part Number:
- MA705
- Manufacturer Part Number:
- MA705
- Description:
- Air Shock Absorber
- Long Description:
- Max-Air Air Adjustable Air Shock Absorber Pack of 2
- Part Type:
- Air Shock Absorber
- Category:
- Suspension
- Subcategory:
- Shocks And Struts
- Warehouse Notes:
- MAX-AIR ADJUST SHOCK
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 9.45 lbs.
- Height:
- 3.44"
- Width:
- 7.75"
- Length:
- 7.75"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 048598030733
- Position:
- Rear
Technical Details
- Compressed Length
- 276.22499999999997 MM
- Compressed Length
- 10.875 IN
- Dust Shield Included
- Yes
- Dust Shield Material
- Rubber
- Extended Length
- 441.325 MM
- Extended Length
- 17.375 IN
- Hydraulic Lockout
- No
- Includes Bump Stop
- Yes
- Internal Rebound Bumper
- Yes
- Lower Mount Code
- S4
- Lower Mount Type
- Stem Mount - 2.3/8\" Stem Length X 3/8\"-16 Thread Pitch
- Parts Pack(s)
- (4) P01134
- Shock Absorber Body End Measuring Point
- Base of Stem
- Shock Absorber Rod End Measuring Point
- Base of Stem
- Travel Length
- 165.1 MM
- Travel Length
- 6.5 IN
- Upper Mount Code
- S4
- Upper Mount Type
- Stem Mount - 2.3/8\" Stem Length X 3/8\"-16 Thread Pitch
- CTO
- US
- Emission Code
- 4
- Canadian Harmonizing Tariff Code
- 8708803000
- Harmonized Tariff Code (Schedule B)
- 8708801600
- Harmonized Tariff Code (HTS)
- 8708801600
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDS Sheet Number
- 1164
- SDR Required Flag
- Y
- PRC
- NEW
- Taxable
- Y
- APS
- 1957-1958 Ford Custom 300 (Rear) 1957-1970 Ford Fairlane (Rear) 1960-1970 Ford Falcon (Rear) 1961-1965 Ford Falcon Sedan Delivery (Rear) 1957 Ford Custom (Rear) 1965-1973 Ford Mustang Base (Rear) 1960-1965 Ford Ranchero (Rear)
- Application Summary
- 1957-1958 Ford Custom 300 (Rear) 1957-1970 Ford Fairlane (Rear) 1960-1970 Ford Falcon (Rear) 1961-1965 Ford Falcon Sedan Delivery (Rear) 1957 Ford Custom (Rear) 1965-1973 Ford Mustang Base (Rear) 1960-1965 Ford Ranchero (Rear) 1961-1963 Ford Thunderbird (Rear) 1968-1971 Ford Torino GT Base Squire Brougham 500 (Rear) 1968-1971 Mercury Cyclone (Rear) 1958 Edsel Villager (Rear) 1958 Edsel Citation (Rear) 1958 Edsel Corsair (Rear) 1958 Edsel Ranger (Rear) 1958 Edsel Bermuda (Rear) 1958 Edsel Roundup (Rear) 1958 Edsel Pacer (Rear) 1960-1969 Mercury Comet (Rear) 1967-1973 Mercury Cougar (Rear) 1962-1963 Mercury Meteor (Rear) 1968-1971 Mercury Montego (Rear) 1975-1980 American Motors Pacer (Rear) 1979-1983 Mazda GLC (Rear) (Body: Wagon)
- Extended Product Description
- Monroe Max-Air MA705 Air Adjustable Air Shock Absorber Pack of 2
- FAB
- CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- FAB
- EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- FAB
- BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- FAB
- MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission see owner's manual)
- FAB
- EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride
- Product Description - Invoice
- Max-Air Air Shock Absorber
- Marketing Description
- Ideal for hauling, Monroe(R) Max-Air(R) shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner's manual.)
- Short Product Description
- Air Shock Absorber
Specifications
The MONROE SHOCKS/STRUTS Air Shock Absorber contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1972 | Ford | Mustang | 4.1L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
| 1972 | Ford | Mustang | 4.1L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
| 1972 | Ford | Mustang | 4.1L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
| 1972 | Ford | Mustang | 5.0L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
| 1972 | Ford | Mustang | 5.0L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
| 1972 | Ford | Mustang | 5.0L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
| 1972 | Ford | Mustang | 5.0L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
| 1972 | Ford | Mustang | 5.8L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
| 1972 | Ford | Mustang | 5.8L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
| 1972 | Ford | Mustang | 5.8L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
| 1972 | Ford | Mustang | 5.8L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
| 1972 | Ford | Mustang | 5.8L | [Max-Air Air Shock Absorber] Rear; Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.