To make sure this part does fit your vehicle Check The Fit
Drive Shaft End Yoke - Gm Genuine Parts - Drive Shaft Transmission Yoke (Part Number: 15004046)
- Grade Type: Regular
- Grease Fitting Included: No
- Height: 4.38 IN
- Length: 8.62 IN
- Length Axis 1: 5.33 IN
- Length Axis 1 (mm): 135.5 mm
- Material: Iron
- Programming Required: No
- Shaft Diameter: 2.56 IN
- Shaft Diameter (mm): 65.14 mm
- Shaft Length: 2.14 IN
- Shaft Length (mm): 54.36 mm
- Spline Quantity: 34
- Weight: 4.82 LB
- Width: 5.38 IN
- Application Summary: ChevroletGMC
- AAIA Part Type Description: Drive Shaft End Yoke
- Extended Product Description: Drive Shaft Transmission Yoke
- CTO: MX
- Harmonized Tariff Code (HTS): 8708995300
- Life Cycle Status Code: 4
- Life Cycle Status Description: Announced
- Maximum Cases per Pallet Layer: 76
- Pallet Layer Maximum: 3
- Remanufactured Part: Y
- Warranty Special: 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details
- Warranty Special UOM: TX
- Manufacturer:
- Gm Genuine Parts
- Part Number:
- 15004046
- Manufacturer Part Number:
- 15004046
- Description:
- Drive Shaft End Yoke
- Long Description:
- Drive Shaft Transmission Yoke
- Part Type:
- Drive Shaft End Yoke
- Category:
- Driveline And Axles
- Subcategory:
- Drive Shaft
- Warehouse Notes:
- 15004046 Drive Shaft Transmiss
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 4.82 lbs.
- Height:
- 4.38"
- Width:
- 5.38"
- Length:
- 5.38"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Position:
- Rear Driveshaft at Transmission
Technical Details
- Grade Type
- Regular
- Grease Fitting Included
- No
- Height
- 4.38 IN
- Length
- 8.62 IN
- Length Axis 1
- 5.33 IN
- Length Axis 1 (mm)
- 135.5 mm
- Material
- Iron
- Programming Required
- No
- Shaft Diameter
- 2.56 IN
- Shaft Diameter (mm)
- 65.14 mm
- Shaft Length
- 2.14 IN
- Shaft Length (mm)
- 54.36 mm
- Spline Quantity
- 34
- Weight
- 4.82 LB
- Width
- 5.38 IN
- Application Summary
- ChevroletGMC
- AAIA Part Type Description
- Drive Shaft End Yoke
- Extended Product Description
- Drive Shaft Transmission Yoke
- CTO
- MX
- Harmonized Tariff Code (HTS)
- 8708995300
- Life Cycle Status Code
- 4
- Life Cycle Status Description
- Announced
- Maximum Cases per Pallet Layer
- 76
- Pallet Layer Maximum
- 3
- Remanufactured Part
- Y
- Warranty Special
- 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details
- Warranty Special UOM
- TX
Specifications
The GM GENUINE PARTS Drive Shaft End Yoke contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2012 | GMC | Sierra 3500 HD | 6.0L | Rear Driveshaft at Transmission; RWD, Auto Trans, 1000, 6 Speed Trans, Transmission; Quantity needed per vehicle: 1 |
| 2012 | GMC | Sierra 3500 HD | 6.0L | Rear Driveshaft at Transmission; RWD, Auto Trans, 1000, 6 Speed Trans, Transmission; Quantity needed per vehicle: 1 |
| 2012 | GMC | Sierra 3500 HD | 6.6L | Rear Driveshaft at Transmission; RWD, Auto Trans, 1000, 6 Speed Trans, Transmission; Quantity needed per vehicle: 1 |
| 2012 | GMC | Sierra 3500 HD | 6.6L | Rear Driveshaft at Transmission; RWD, Auto Trans, 1000, 6 Speed Trans, Transmission; Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.