Your Vehicle: 2017 Kia NIRO Click here to choose a new vehicle
This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
GATES - Cooling System Flush Gun Kit - GAT 91002

Cooling System Flush Gun Kit - Gates - Power Clean Flush Tool Kit - 6 Components w/ Storage Case (Part Number: 91002)

  • Price:   $  707.27

  • Availability: In Stock (1)

Fits your vehicle.

  • CTO: US
  • Harmonized Tariff Code (Schedule B): 8479899460
  • Life Cycle Status Code: 4
  • SDR Required Flag: N
  • Taxable: Y
  • Abbreviated Product Description: Tool
  • Application Summary: 2018-00 Chevrolet, Silverado Series Pickup, V-8 5.3 L, Power Clean Flush Tool Kit
  • FAB: Large rubber tip for radiator necks and direct flushing of the engine block
  • FAB: Patented process uses fixed dimensional control of the air and liquid flow paths
  • FAB: 5/8 in. and 3/4 in. heater hose barbs for flushing heater cores or engine blocks
  • FAB: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
  • FAB: Water line backflow preventer
  • FAB: Process allows air to pressurize the cleaning fluid to scrub deep into corners and crevices, eliminating trapped debris
  • FAB: While the \"pulse\" is intensified with some limited backpressure, the pressure is immediately regulated to a safe level if a hard blockage exists eliminating the possibility of heater core damage from excessive system pressure
  • FAB: Small rubber tip on whip hose for direct access to heater core tube stubs
  • Product Description - Invoice: Tool/Accessory/Kit/Repair Part
  • Marketing Description: Using clean water and compressed air, the PowerClean Flush Tool \"water hammers\" accumulated sludge and scale deposits without the use of harsh chemicals or solvents. It cleans radiators, heat exchangers, hoses and engine blocks more effectively than conventional flushes, maintains system integrity and ensures warranty coverage on replacement parts, including water pumps.
  • Short Product Description: Tool/Accessory
  • TLE: Power Clean Flush Tool Kit - 6 Components w/ Storage Case
  • Description: Power Clean Flush Tool

Product Details

Manufacturer:
Gates
Part Number:
91002
Manufacturer Part Number:
91002
Description:
Cooling System Flush Gun Kit
Long Description:
Power Clean Flush Tool Kit - 6 Components w/ Storage Case
Part Type:
Cooling System Flush Gun Kit
Category:
Vehicles Equipment Tools And Supplies
Subcategory:
Cooling System Service
Warehouse Notes:
POWERCLEAN FLSH TL
Sales Rank:

Technical Details

Condition:
New
Product Fit:
Direct Fit
Weight:
9.08 lbs.
Height:
5"
Width:
14"
Length:
14"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1
Item GTIN:
770075514022

Specifications

CTO
US
Harmonized Tariff Code (Schedule B)
8479899460
Life Cycle Status Code
4
SDR Required Flag
N
Taxable
Y
Abbreviated Product Description
Tool
Application Summary
2018-00 Chevrolet, Silverado Series Pickup, V-8 5.3 L, Power Clean Flush Tool Kit
FAB
Large rubber tip for radiator necks and direct flushing of the engine block
FAB
Patented process uses fixed dimensional control of the air and liquid flow paths
FAB
5/8 in. and 3/4 in. heater hose barbs for flushing heater cores or engine blocks
FAB
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
FAB
Water line backflow preventer
FAB
Process allows air to pressurize the cleaning fluid to scrub deep into corners and crevices, eliminating trapped debris
FAB
While the \"pulse\" is intensified with some limited backpressure, the pressure is immediately regulated to a safe level if a hard blockage exists eliminating the possibility of heater core damage from excessive system pressure
FAB
Small rubber tip on whip hose for direct access to heater core tube stubs
Product Description - Invoice
Tool/Accessory/Kit/Repair Part
Marketing Description
Using clean water and compressed air, the PowerClean Flush Tool \"water hammers\" accumulated sludge and scale deposits without the use of harsh chemicals or solvents. It cleans radiators, heat exchangers, hoses and engine blocks more effectively than conventional flushes, maintains system integrity and ensures warranty coverage on replacement parts, including water pumps.
Short Product Description
Tool/Accessory
TLE
Power Clean Flush Tool Kit - 6 Components w/ Storage Case
Description
Power Clean Flush Tool

The GATES Cooling System Flush Gun Kit contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
2017KiaNiro1.6L[Cooling System Flush Gun Kit] FULL HYBRID EV-GAS (FHEV); Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.

All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.

Under NO circumstances will our liability exceed the amount of the original sale.

Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.

The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.

All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.

Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.



Can't find what you are looking for? Try searching by one of these methods below.