To make sure this part does fit your vehicle Check The Fit
Suspension Shock Absorber - Monroe Shocks/struts - OESpectrum Suspension Shock Absorber (Part Number: 5575)
- CTO: US
- Emission Code: 4
- Canadian Harmonizing Tariff Code: 8708803000
- Harmonized Tariff Code (Schedule B): 8708801600
- Harmonized Tariff Code (HTS): 8708801600
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- SDS Sheet Number: 01164
- SDR Required Flag: Y
- PRC: New
- Taxable: Y
- Body Diameter: 1.52 IN
- Body Diameter: 38.608 MM
- Compressed Bumper Stop: No
- Compressed Length: 13.98 IN
- Compressed Length: 355.092 MM
- Dust Shield: No
- Extended Bumper Stop: Yes
- Extended Hydraulic Lockout: No
- Extended Length: 573.5319999999999 MM
- Extended Length: 22.58 IN
- Lower Mount Code: S41
- Lower Mount Type: Stem Mount - 2 11/16\" Stem Length X 3/8\"-16 Thread Pitch
- Parts Pack(s): P01603
- Shock Absorber Body End Measuring Point: Center of Loop
- Shock Absorber Body End Measuring Point: Base of Stem
- Shock Absorber Rod End Measuring Point: Base of Stem
- Shock Absorber Rod End Measuring Point: Center of Loop
- Travel Length: 218.43999999999997 MM
- Travel Length: 8.6 IN
- Upper Mount Code: LS32
- Upper Mount Type: Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 2 1/8\" Sleeve OAL
- APS: 2018-2021 Kia Rio (Rear) (Qualifier: Recommended OE Application -Specific Replacement) 2018-2022 Hyundai Accent (Rear) (Qualifier: Recommended OE Application -Specific Replacement)
- Application Summary: 2018-2021 Kia Rio (Rear) (Qualifier: Recommended OE Application -Specific Replacement) 2018-2022 Hyundai Accent (Rear) (Qualifier: Recommended OE Application -Specific Replacement)
- Extended Product Description: Monroe OESpectrum 5575 Suspension Shock Absorber
- FAB: BUY WITH CONFIDENCE -- Comes with Monroe's Limited Lifetime Warranty and exclusive Feel the DifferenceTM Guarantee
- FAB: CONTROL AND DURABILITY -- PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- FAB: BUILT TO LAST -- Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- FAB: IMPROVES PERFORMANCE -- Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- FAB: EXCEPTIONAL HANDLING -- Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- FAB: REDUCED NOISE, VIBRATION AND HARSHNESS -- Twin TechnologyTM Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- FAB: CONSISTENT RIDE -- OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- Product Description - Invoice: OESpectrum Shock Absorber
- Marketing Description: Designed to restore a vehicle's original factory drivability and performance, Monroe(R) OESpectrum(R) passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
- Short Product Description: Shock Absorber
- Manufacturer:
- Monroe Shocks/struts
- Part Number:
- 5575
- Manufacturer Part Number:
- 5575
- Description:
- Suspension Shock Absorber
- Long Description:
- OESpectrum Suspension Shock Absorber
- Part Type:
- Suspension Shock Absorber
- Category:
- Suspension
- Subcategory:
- Shocks And Struts
- Warehouse Notes:
- OESpectrum Shock Absorber
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 3.47 lbs.
- Height:
- 2.6"
- Width:
- 4"
- Length:
- 4"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 2
- Minimum Order Qty:
- 1
- Item GTIN:
- 048598247544
- Position:
- Rear
Technical Details
- CTO
- US
- Emission Code
- 4
- Canadian Harmonizing Tariff Code
- 8708803000
- Harmonized Tariff Code (Schedule B)
- 8708801600
- Harmonized Tariff Code (HTS)
- 8708801600
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDS Sheet Number
- 01164
- SDR Required Flag
- Y
- PRC
- New
- Taxable
- Y
- Body Diameter
- 1.52 IN
- Body Diameter
- 38.608 MM
- Compressed Bumper Stop
- No
- Compressed Length
- 13.98 IN
- Compressed Length
- 355.092 MM
- Dust Shield
- No
- Extended Bumper Stop
- Yes
- Extended Hydraulic Lockout
- No
- Extended Length
- 573.5319999999999 MM
- Extended Length
- 22.58 IN
- Lower Mount Code
- S41
- Lower Mount Type
- Stem Mount - 2 11/16\" Stem Length X 3/8\"-16 Thread Pitch
- Parts Pack(s)
- P01603
- Shock Absorber Body End Measuring Point
- Center of Loop
- Shock Absorber Body End Measuring Point
- Base of Stem
- Shock Absorber Rod End Measuring Point
- Base of Stem
- Shock Absorber Rod End Measuring Point
- Center of Loop
- Travel Length
- 218.43999999999997 MM
- Travel Length
- 8.6 IN
- Upper Mount Code
- LS32
- Upper Mount Type
- Loop Bushing and Sleeve Mount - 12mm Sleeve ID X 2 1/8\" Sleeve OAL
- APS
- 2018-2021 Kia Rio (Rear) (Qualifier: Recommended OE Application -Specific Replacement) 2018-2022 Hyundai Accent (Rear) (Qualifier: Recommended OE Application -Specific Replacement)
- Application Summary
- 2018-2021 Kia Rio (Rear) (Qualifier: Recommended OE Application -Specific Replacement) 2018-2022 Hyundai Accent (Rear) (Qualifier: Recommended OE Application -Specific Replacement)
- Extended Product Description
- Monroe OESpectrum 5575 Suspension Shock Absorber
- FAB
- BUY WITH CONFIDENCE -- Comes with Monroe's Limited Lifetime Warranty and exclusive Feel the DifferenceTM Guarantee
- FAB
- CONTROL AND DURABILITY -- PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- FAB
- BUILT TO LAST -- Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- FAB
- IMPROVES PERFORMANCE -- Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- FAB
- EXCEPTIONAL HANDLING -- Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- FAB
- REDUCED NOISE, VIBRATION AND HARSHNESS -- Twin TechnologyTM Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- FAB
- CONSISTENT RIDE -- OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- Product Description - Invoice
- OESpectrum Shock Absorber
- Marketing Description
- Designed to restore a vehicle's original factory drivability and performance, Monroe(R) OESpectrum(R) passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
- Short Product Description
- Shock Absorber
Specifications
The MONROE SHOCKS/STRUTS Suspension Shock Absorber contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2018 | Kia | Rio | 1.6L | [OESpectrum Passenger Car Shock Absorber] Rear; Quantity needed per vehicle: 2 |
| 2018 | Kia | Rio | 1.6L | [OESpectrum Passenger Car Shock Absorber] Rear; Quantity needed per vehicle: 2 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.